How-To Articles Suggest an article

Search the Knowledgebase
Connecting to JC-SECURE with Linux

Step 1) In order to connect to the Wi-Fi, select the wireless/network icon and select JC-SECURE.

Step 2) Use the following settings when connecting to the Wi-Fi.

  • Wi-Fi Security: WAP & WPA2 Enterprise
  • Authentication: should be set to “Protected EAP (PEAP)”
  • Check the box for “No CA certificate is required”
  • PEAP Version: Automatic
  • Inner Authentication: MSCHAPv2
  • Enter your EagleNet Username & Password

Step 3) Select the wireless/network icon and select "Edit Connections"

Step 4) Click JC-SECURE and "Edit"

Step 5) Navigate to the IPv4 Settings tab.  Under Method, select "Automatic (DHCP)".  Then click "Save"

If you haven't already, you will need to register your device.